15 new boards in stock today at the shop. Stop by and check them out!
Category Archives: Custom Boards
We will have a ton of new stock boards at the shop this weekend. Come and check out the selection!
Here is a video of us glassing a mini simmons with a mexican blanket resin pattern. Its a little long but check out the outcome!
Putting on the first rail strips I learned a few lessons. First that you have to screw on both sides for the rails at the same time so you don’t warp your spine! Second that Thomas Blakes original measurements do not make for a flowing outline. I had to take the rail boards off and [...]
Here is the shot of us putting the spine into the board. Each Rib is screwed to the spine in the center with an 1.25″ screw.
Drilling holes in the ribs to use the jigsaw for excess weight removal.
Here we are laying out our templates for the rib sections of the kookbox. Next step to follow later….
Here is a sneak peek of a few boards I took to the surf shop yesterday. Swing in this weekend and check them out.
Austin goes through phases where he pushes the envelopes in each area of a surfboard build. His current area of focus is working on is in the different stringer arrangements. A few months ago it was custom fins and fin art. This was one of the wood and resin fins that he and Joe created. [...]